Running Jenkins on WebSphere 7.x requires WebSphere 188.8.131.52 or above. Jenkins will NOT work on WebSphere versions 184.108.40.206 - 220.127.116.11. See issue 3274 in the #Known Issues section for further information!
- The following installation was tested with WAS 6.1 ND, WAS 7.0 ND, WAS 8.0 Developer Edition and WAS 8.5 Developer Edition
- Some links in Jenkins are broken in WebSphere, but there is usually either another way to access them or it is intuitive to correct the URL in the address bar. It is not critical problem, thus no time to investigate it further...
Table of contents
- The following Hudson versions run on WAS:
- WAS versions:
- Previously mentioned Jenkins versions should all run on WAS 6.1.
- With WAS 7.0 (18.104.22.168, 22.214.171.124 and 126.96.36.199), a WebSphere class loader issue will prevent Hudson 1.291 or greater to start and use all its internal components (see hudson: issue 3274). The bug has been identified and fixed by IBM, but the fix is not yet publicly available. This page will be updated when it's done.
See also the #Known Issues section.
There are two ways to install Jenkins on WAS:
Admin console installation
The following works fine on WAS 6.1, WAS 7.0, WAS 8.0 and WAS 8.5.
The installation instructions are simple as for each WAR Module.
- Start the installation wizard under Applications - Install new application.
- Select jenkins.war and enter the context root for the application - for example jenkins
After finishing the wizard click the installed application (jenkins_war for example) and perform the following steps to change the classloader mode:
- Click Manage Modules
- Click Hudson / Jenkins
- From the "Class loader order" drop-down select "Classes loaded with application class loader first" ("Classes loaded with local class loader first" V8.5)
- Save the changes
- Restart the server - this is necessary to apply the changed class loader mode. You need to restart only the server onto which jenkins is installed. (V8.5: no need to restart the server, just start the Jenkins app).
If you try to install Jenkins 1.450 on WAS 8, you may face some exceptions mentioned in JENKINS-12334. This may occur, if an SLF4J implementation is missing.
Since log4j is already on the Classpath, you might want to download the slf4j-log4j bridge and copy that JAR into the WEB-INF/lib folder of Jenkins.
Installing through wsadmin
Likely needs to be edited to work with Jenkins
If you plan to install Hudson on WAS 7, use the Admin console as the script below won't work (due to some changes in IBM codebase which requires some fixing).
Before running hudson.jacl make the necessary changes in the config.properties file - adjust the server envoronment, the context root, the virtual host mapping and optional the hudson home directory. After that run following command from the deployment manager bin directory:
where the <command> is:
- deploy - use it for first time installation. it performs installation only
- redeploy - use it to upgrade hudson. It uninstalls previously installed hudson instance and installs the new version from the hudson.war
- undeploy - use to uninstall hudson. In this case the last parameter is not necessary.
The paths must be provided in UNIX style even on Windows - d:/test/hudson/hudson.war instead of d:\test\hudson\hudson.war
After successfully installation the server must be restarted manually - the script doesn't provide this functionality at the moment, but the stopServer and startServer commands can be used for this purpose.
If security is enabled on the server either provide -user and -password arguments to the command or adjust the soap.client.props file with the login information in order to be able to connect to the server's admin interface.
The script is not tested with the base server edition, but should work on it - the only change is to disable the node synchronization in the saveConfigAndSync procedure - the line to comment can be found in hudson.jacl - search for BASE or for saveConfigAndSync.
Installation using Jython Scripts
These scripts make heavy use of 'wsadminlib.py', a large monolithic jython library for WebSphere Administration.
The original scripts can be found here Sample Scripts for WebSphere Application Server.
The 'wsadminlib.py' file that is included here has been modified to include some extra functions that were not present in the original.
There are four script files that have been provided. They have been tested under WAS 6.1 and AIX. Feedback is sought for WAS 7.0 and other platforms.
They are executed using the wsadmin.sh tool:
- createHudsonServer.py - wsadmin script to create the Hudson Server.
- deleteHudsonServer.py - wsadmin script to delete the Hudson Server.
- installHudson.py - wsadmin script to install the Hudson Application into the Hudson Server.
- wsadminlib.py - The wsadmin Über library.
Please remember that a 64-bit JVM takes about 60% more heap space than a 32-bit JVM does. Size your VM, if using 64-bit, accordingly. I'm using 1Gb (-Xmx1024M) heap, as 512Mb was causing regular heap dumps due to out of memory errors.
This is simply how I do it. It does require additional machine resources, as it takes a complete JVM, but I prefer to create a server per application which provides for better application isolation and tuning capabilities.
CVS SSH authentication
For CVS ssh authentification following environment entry is required in the application server: CVS_RSH=ssh. This can be set in the admin console in:
Application Servers / <server> / Java and Process Management / Process Definition / Environment Entries
Changing the WAR file to reference the newest dom4j library (see hudson: issue 1680):
- Unpack hudson.war and navigate to WEB-INF/lib directory.
- Download dom4j-1.6.1.jar and copy it to the WEB-INF/lib directory.
- Delete dom4j-1.5.jar
- Zip the war file again.
Following steps should be done upgrading running hudson instance:
Do not remove dom4j-1.6.1-hudson-1.jar!
- Backup the current configuration
* Redeploy hudson with the provided scripts as follows:
Edit config.properties to the environment and run (see Installing through wsadmin above for further information):
The above command assumes that wsadmin.sh is in PATH and hudson.jacl, config.properties and hudson.war are in the current dir.
- Restart the application server.
Setting up WAS for the update center to work
As of version 1.23x? hudson provides update center. In order to be able to use it with the WebSphere's JDK a trusted certificate must be imported in the server's keystore. To acomplish this following steps are necessary:
- Download the RapidSSL root certificate from here .
- Install the certificate using #keytool (command-line mode) or IBM Key Management (GUI mode).
- After importing the certificate the application server must be restarted. After that it should be possible to upgrade your plugins from the Update Center in hudson (don't forget to set the proxy if you have one).
Importing the certificate using the keytool command (command-line mode)
- <server_trust.p12> points to the trust.p12 file of the server on which hudson is running. It is found in
- The command uses the default WebSphere password for the keystore file (WebAS) - if it has been changed change the command accordingly.
Issuing the command brings a message that the certificate is found in the system wide keystore - confirm with yes that it should be updated.
Importing the certificate using IBM Key Management (GUI mode)
- Go to Key Database File > Open.
- In the Open window, set the Key database type to PKCS12 _, then use the _Browse button to locate the
trust.p12file (it's in
- Enter the password for this keystore (the default value is WebAS).
- In the Key database content, select the Signer Certificates item.
- Click on the Add... button, locate the certificate you've previously downloaded, and click on OK.
- When asked to Enter a Label, set the value to rapidssl and click on OK.
- Go to Key Database File > Save As... and overwrite the existing
trust.p12file (it's a good idea to make a copy of it before...).
- When asked for a password, set it to the previous value (again, WebAS is the default one).
- Exit from the tool.
Following table tries to summarize the known issues. If there is a fix from IBM its PK Id will be referenced.
Hudson - Affects
Hudson - Fixed In
WAS - Affects
WAS - Fixed In
I'm experiencing VerifyError on WAS 7.0 trying to use the provided JIRA plugin due to dependencies on the Stax API included in the stax-api-1.0.1.jar. I've simply removed the jar file from hudson's lib directory and it works ok for me. For further details see this thread.